2 hooks, 4 medium strips. Holds 1.3 kg (3 lb). Damage-free hanging. Holds strongly. Removes cleanly. Made in USA with US and globally sourced materials.

To Apply: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Remove red liners. Press adhesive to hook. Repeat, with second strip. 3. Black side. Remove black liners. 4. Press to surface for 10 seconds. 5. Important: For maximum holding strength slide hook off. 6. And press base firmly for 30 seconds. 7. Slide hook on. 8. Wait 1 hour before use. To Remove: 1. Slide hook up to remove from mounting base. 2. Never pull strip towards you. 3. Hold base gently to prevent base from snapping fingers. Do not press base against wall. 4. Stretch straight down along wall at least 12 inches (38 cm) until base and strip release. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C). Hook can be reused with Command Medium Strips.

Failure to follow instructions carefully may cause damage! Do not use with wallpaper. May not adhere well to vinyl surfaces. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang items over beds. Use only one hook per item hung. Not intended for picture hanging. Instead use Command Picture Hanging Strips, Sawtooth or wire-backed hangers.