Inside the Sleep8 filtered bag is where the magic happens. Once the Sleep8 device is connected to this filtered bag, all enclosed CPAP components can be simply and safely sanitized. We recommend changing the bag every 3 months with daily use.

Ensure your mask has been wiped clean to remove any visible dirt or oils, prior to use. Unzip the gab and find the round white valve inside. Detach the tubing from your CPAP machine and attach it to this valve. Put all CPAP tubing, mask, cushions, and dry water chamber inside the bag. Then zip the bag closed.

Slide your Sleep8’s triangular port on the triangular valve on the outside of the bag. Make sure to match the blue dots on the device and the bag’s port. They should fit snuggly together. The device will only work once there’s a secure connection. Again make sure the bag is completely zipped closed.

Press the power button until you hear a beep and see the Sleep8 screen light up. The screen will count down until the sanitization is complete. It’s normal to hear the fan oscillate and pause for short periods. When done, your Sleep8 will automatically turn off. The bag should be left closed for 1 hour after the cleaning in completed. Afterward, unzip the bag to find your sanitized CPAP accessories ready to use.

• Please carefully read all of the written instructions before using the Sleep8 device. Failure to follow these instructions could result in injury, device failure, or damage to property.
• If you have any questions about operating the Sleep8 device, please visit MySleep8.com or call 888-549-9799
• Do NOT open the bag while the Sleep8 device is connected and working.
• Make sure to keep the bag closed for 1 hour after the cleaning cycle has finished. The filtration process still needs time to finish.
• For patients using a CPAP with a water chamber, always dry your water chamber thoroughly before placing it in the bag.