This complete kit is all you need to sanitize any CPAP, BIPAP, or APAP device; including the mask, heated and non-heated tubing, and water chamber all at once. We recommend changing the bag every 3 months with daily use.
Kit Includes:

• 1 Sleep8 Device
• 1 Sanitizing Filter Bag
• 1 Micro USB Charger

The Sleep8 ozone CPAP Sanitizer is the leader in market technology.The Sleep8 works to sanitize your CPAP, BIPAP, or APAP by generating ozone to sterilize everything you place in the replaceable cleaning bag.
The simple design is easy and convenient to use. Simply unplug your hose from your PAP device and plug it into the universal port inside the bag.The port will accommodate heated hoses, electric diagnostic hoses, and standard PAP hoses all without any additional adapters or parts to buy. Next simply close the bag with your mask and hose inside. Finally you plug the Sleep8 device to the outside port on the cleaning bag, and press the button.
That's it!

The device will clean for 1 hour, and turn itself off. We recommend that you don't open the bag for another hour after the cleaning is completed.
Aside from easy operation, what makes the Sleep8 the best around?

Noise: Many older and inferior products that claim to do what the Sleep8 does are loud. Old inefficient designs use pressurized air pumps to fill small cleaning chambers. No only does this limit the types of masks they can clean, it means they are large heavy and very loud.

Safety: Some units on the market cut corners on safety. The Sleep8 does not, it uses multiple 1 way flapper valves to ensure that all of the ozone produced goes into the cleaning bag. In-fact, we even have a safety shut off that prevents the unit from running when not connected properly. The Sleep8 attention to detail even goes so far as to seal the charging port against any ozone leakage. Once in the cleaning bag, the only way for ozone to leave is through a large activated carbon filter. This filter reacts with the ozone rendering it safe.

Some of the other products on the market don't even seal their cleaning chamber. This means that they leak ALL the ozone they produce directly into the room where you are.

Portability & Home Use: The Sleep8 was designed from the start to be a unit for both portable AND home use. While other units are designed either just for travel, or just for home use, the Sleep8 does it all. Many home units are large, loud, and bulky, not suited to travel. Many portable units use cheap charge controllers, that don't allow you to run the unit while it is plugged in! That means a constant plugging and unplugging and finding a lost cable EVERY, SINGLE, DAY.

The Sleep8 doesn't cut corners, we use a high-quality charge controller that lets you keep the convenience of a portable unit, but still be able to leave it plugged in while at home.The best of both worlds!

Ensure your mask has been wiped clean to remove any visible dirt or oils, prior to use. Unzip the gab and find the round white valve inside. Detach the tubing from your CPAP machine and attach it to this valve. Put all CPAP tubing, mask, cushions, and dry water chamber inside the bag. Then zip the bag closed.

Slide your Sleep8’s triangular port on the triangular valve on the outside of the bag. Make sure to match the blue dots on the device and the bag’s port. They should fit snuggly together. The device will only work once there’s a secure connection. Again make sure the bag is completely zipped closed.

Press the power button until you hear a beep and see the Sleep8 screen light up. The screen will count down until the sanitization is complete. It’s normal to hear the fan oscillate and pause for short periods. When done, your Sleep8 will automatically turn off. The bag should be left closed for 1 hour after the cleaning in completed. Afterward, unzip the bag to find your sanitized CPAP accessories ready to use.

• Please carefully read all of the written instructions before using the Sleep8 device. Failure to follow these instructions could result in injury, device failure, or damage to property.
• If you have any questions about operating the Sleep8 device, please visit MySleep8.com or call 888-549-9799
• Do NOT open the bag while the Sleep8 device is connected and working.
• Make sure to keep the bag closed for 1 hour after the cleaning cycle has finished. The filtration process still needs time to finish.
• For patients using a CPAP with a water chamber, always dry your water chamber thoroughly before placing it in the bag.