ResMed Mirage™ FX (mask cushion only) - Standard

Includes the nasal cushion for the ResMed Mirage™ FX nasal CPAP mask. This purchase does not include the Mirage FX headgear or mask frame system. 

About the complete ResMed Mirage FX mask system:
• Nose coverage, nasal mask, silicone cushion
• Quick-release elbow allows you to get up at night and disconnect without removing the mask
• Features the Spring Air™ cushion, designed to reduced pressure on the face while maintaining a high-performing seal
• Design is a predecessor to today’s popular AirFit™ series
• Prescription required for complete mask system

ResMed Mirage™ FX (mask cushion only)

Replacing your equipment
The Centers for Medicare and Medicaid Services (CMS) coverage guidelines allow for regular replacement of masks and accessory parts, like air filters or tubing.
Replacing your mask and accessories as appropriate helps ensure you are receiving the best, most comfortable therapy possible.

Mirage FX User Guide: https://www.resmed.com/us/dam/documents/products/Mask/mirage-series/user-guide/mirage-fx_user-guide_amer_eng.pdf 

All ResMed product guides can be found on ResMed.com

ResMed Mirage™ FX (mask cushion only)

Intended use
The Mirage FX channels airflow noninvasively to a patient from a continuous positive airway pressure (CPAP) or bilevel device.

The Mirage FX is:
• to be used by patients (> 66 lb/30 kg) for whom positive airway pressure has been prescribed
• intended for single-patient re-use in the home environment and multipatient re-use in the hospital/institutional environment.

WARNING
• The vent holes must be kept clear.
• This mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist.
• The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air. Explanation: CPAP and bilevel devices are intended to be used with special masks (or connectors which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent holes. However, when the device is not operating, insufficient fresh air will be provided through the mask, and the exhaled air may be rebreathed. Rebreathing of exhaled air for longer than several minutes can, in some circumstances, lead to suffocation. This applies to most models of CPAP or bilevel devices.
• Follow all precautions when using supplemental oxygen.
• Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and a risk of fire.
• Remove all packaging before using the mask.
• Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms.

Using your mask
When using your mask with ResMed CPAP or bilevel devices that have mask setting options, refer to the Technical specifications section in this user guide for mask setting options. For a full list of compatible devices for this mask, see the Mask/ Device Compatibility List on www.resmed.com on the Products page under Service & Support. If you do not have internet access.

Note: If you experience nasal dryness or irritation, using a humidifier is recommended.

Mirage FX User Guide: https://www.resmed.com/us/dam/documents/products/Mask/mirage-series/user-guide/mirage-fx_user-guide_amer_eng.pdf 

ResMed product user guides: www.resmed.com/en-us/sleep-apnea/cpap-parts-support/cpap-product-manuals/