Lifts up to 2-3 levels    * Varying results depending on starting level, texture, and porosity• Multiple applications may be needed• If hair is longer than chin length or thick we recommend 2 kits

Ingredients:

Water

Propylene Glycol

Cetyl Alcohol

Laureth-4

Ethanolamine

Laureth-10

PEG-2 Cocamine

Methoxyisopropanol

Isopropyl Alcohol

Cocos Nucifera (Coconut) Oil

Aloe Barbadensis Leaf Juice

HypericumPerforatum Flower/Leaf/Stem Extract

Perfume

EDTA

Step 1

TIP: Bleach can stain skin and/remove color from clothing and surfaces with which it comes in contact. Cover surrounding counter-tops and surface areas.

 •For best results hair should be clean and completely dry

•Protect your clothing by wearing a cape, towel or old t-shirt

•Pre- section hair into four sections to help manage bleach application

Step 2

Wear gloves throughout the entire process

• Protect skin around forehead, neck and ears with petroleum jelly

Step 3

TIP: Put gloves on before mixing

• Carefully remove nozzle cap from Oxide MIXING BOTTLE, while pointing bottle away from face and eyes

• Carefully pour entire content of Bleach Oil bottle INTO the Oxide MIXING BOTTLE

WARNING: DO NOT APPLY BLEACH TO HAIR THAT HAS BEEN PREVIOUSLY PROCESSED WITH METALLIC DYES. WARNING: DO NOT APPLY IF SKIN OR SCALP IS DAMAGED OR BROKEN

Step 4

• Re-fix the nozzle cap onto the Oxide MIXING BOTTLE

 • Gently shake for 30 seconds or until the mixture becomes one

• Immediately after mixing cut the tip of the applicator nozzle and quickly proceed to STEP 5

 WARNING: DO NOT LEAVE BLEACH MIXTURE CONTENTS IN MIXING BOTTLE FOR MORE THAN 2 MINUTES WITHOUT USING. CONTENTS CAN BUILD PRESSURE AND BOTTLE MAY BURST.

Step 5

TIP: Work through each section of hair by taking narrow subsections to ensure coverage. DO NOT APPLY TO SCALP OR SKIN.

• Apply Conditioning Bleach mixture on the hair immediately after mixture is ready

• Keep bleach mixture ¼ inch off the scalp

• Make sure all hair strands are thoroughly coated and saturated

WARNING: IF AT ANYTIME YOU EXPERIENCE BURNING, ITCHING OR SWELLING RINSE YOUR HAIR IMMEDIATELY; YOU MAY BE HAVING AN ALLERGIC REACTION. IMMEDIATELY AFTER USING BLEACH MIXTURE, REMOVE NOZZLE (POINT AWAY FROM FACE), RINSE BOTTLE AND DISCARD.

Step 6

• Process hair up to 45 minutes, use your strand test to determine best timing for you • Check hair color every 10 minutes by wiping bleach mixture from a few strands of hair. If hair is not the desired shade, re-coat strands with bleach mixture and process another 10 minutes • Avoid over-processing; DO NOT leave bleaching mixture on hair for more than 45 minutes EVEN if you have not yet achieved the desired shade.

Step 7

• Rinse your hair with cold or lukewarm water, use Color Oops Complete Shampoo to thoroughly remove all bleach mixture from hair • Use Color Oops Reconstructor Conditioner and rinse NOTE: If your hair is not the desired shade after 45 minutes, another bleach application may be necessary. Wait at least 14 days between bleach applications.

Step 8

Dry and style hair as desired

CAUTIONS IN CASE OF A REACTION WHILE BLEACHING HAIR SUCH AS RASH, ITCHING, STINGING OR BURNING SENSATION ON THE SCALP, RINSE IMMEDIATELY AND DISCONTINUE USE.

DO NOT USE IF:

• YOU HAVE ALREADY HAD A REACTION TO HAIR COLOR PRODUCT

• YOU HAVE A SENSITIVE, ITCHY OR IRRITATED SCALP

• IF SKIN IS BROKEN OR DAMAGED

• IF YOU HAVE TATTOOS THE RISK OF AN ALLERGIC REACTION MAY BE INCREASED. THIS PRODUCT MAY CAUSE INJURY, ESPECIALLY TO YOUNG CHILDREN. REFRAIN FROM USING THIS PRODUCT ON YOUNG CHILDREN. IF USED ON CHILDREN SUPERVISE THEM AND MAKE SURE YOU/THEY ADHERE TO THE WARNINGS AND PRECAUTIONS LISTED AND CONDUCT ALL ALLERGY TESTS FIRST. IF YOU EXPERIENCE DIFFICULTY BREATHING, TIGHTNESS OF CHEST AND/OR HIVES OR SWELLING AT ANY PLACE ON THE BODY DISCONTINUE USE IMMEDIATELY AND GET MEDICAL ATTENTION. DO NOT APPLY BLEACH TO HAIR THAT HAS BEEN PREVIOUSLY PROCESSED WITH METALLIC DYES.

CAUTIONS AND WARNINGS WHEN BLEACHING HAIR

• AVOID CONTACT OF PRODUCTS WITH SKIN, EYES AND CLOTHING. DO NOT USE PRODUCTS TO COLOR EYELASHES OR EYEBROWS. o IF PRODUCT GETS ON SKIN WASH IMMEDIATELY WITH SOAP AND WATER. IF SKIN IRRITATION OCCURS SEEK MEDICAL ATTENTION. o IF PRODUCT GETS INTO EYES RINSE IMMEDIATELY WITH WATER. IF YOU ARE WEARING CONTACT LENSES REMOVE THEM BEFORE RINSING YOUR EYES. CONTACT A MEDICAL PROFESSIONAL IF IRRITATION PERSISTS.

• AVOID BREATHING DUST, FUMES, VAPORS ETC. FROM THESE PRODUCTS. THESE PRODUCTS MAY CAUSE BREATHING DIFFICULTIES, ALLERGIES AND/OR ASTHMA SYMPTOMS. PREPARE AND USE PRODUCTS IN A WELL-VENTILATED AREA OR OUTDOORS. o IF YOU INHALE A PRODUCT AND BREATHING BECOMES DIFFICULT GET FRESH AIR AND REST IN A COMFORTABLE BREATHING POSITION AND SEEK MEDICAL ATTENTION.

 • DO NOT INGEST PRODUCTS o IF YOU SWALLOW PRODUCT, IMMEDIATELY RINSE YOUR MOUTH, DRINK PLENTY OF WATER AND CONTACT A MEDICAL PROFESSIONAL.

 • THESE PRODUCTS ARE NOT INTENDED TO BE USED ON FACIAL HAIR OR BODY HAIR.

SKIN ALLERGY TEST INSTRUCTIONS FOR CONDITIONING BLEACH

• CLEANSE ARM AREA THE SIZE OF A QUARTER IN THE BEND OF YOUR ELBOW WITH SOAP AND WATER. PAT DRY.

• REMOVE A SMALL AMOUNT OF OXIDE FROM THE OXIDE BOTTLE AND MIX WITH A SMALL AMOUNT OF BLEACH POWDER. DO NOT USE METAL UTENSILS TO MEASURE OR MIX EITHER THE OXIDE OR BLEACH POWDER. DO NOT MIX IN THE MIXING BOTTLE FOR THIS TEST. TIGHTLY RECAP THE BOTTLE AND FOLD THE BLEACH POWDER PACKET CLOSED AND STORE IN A COOL DRY AREA.

• APPLY CONDITIONING BLEACH MIXTURE TO THE TEST AREA WITH A COTTON SWAB OR COTTON BALL. • LET TEST AREA SPOT DRY. DO NOT WASH. DO NOT DISTURB FOR 48 HOURS.

• CHECK TEST AREA PERIODICALLY OVER THE NEXT 48 HOURS. IF YOU EXPERIENCE ANY REACTION SUCH AS REDNESS, ITCHING, BURNING, SWELLING, SKIN ABRASIONS, ERUPTIONS OR IRRITATIONS IN OR AROUND THE TEST AREA DO NOT LIGHTEN YOUR HAIR UNTIL YOU CONSULT A MEDICAL PROFESSIONAL.

STRAND TEST INSTRUCTIONS

TO PREVIEW YOUR HAIR COLOR/ BLEACHING RESULTS WE STRONGLY RECOMMEND YOU PERFORM A PRELIMINARY STRAND TEST.

1. PUT ON PROTECTIVE GLOVES.

2. SELECT A SMALL SECTION OF HAIR TO TEST IN AN AREA THAT IS EASY TO REACH AND SEE.

3. USING PLASTIC CLIPS SEPARATE THE REST OF YOUR HAIR AWAY FROM THE TEST STRAND SO THAT IT DOES NOT COME IN CONTACT WITH THE REST OF YOUR HAIR.

4. APPLY BLEACH MIXTURE TO TEST STRAND UNTIL FULLY SATURATED. a. CHECK A DIFFERENT PORTION OF THE STRAND TEST EVERY 5 MINS TO VIEW PROGRESS. b. LEAVE ON FOR MAXIMUM OF 45 MINUTES / MAXIMUM PROCESSING TIME, THEN RINSE AND WASH HAIR.

5. TAKE NOTE OF THE TIMING IT TOOK TO REACH DESIRED SHADE AND USE IT FOR FULL APPLICATION.