Skip to main content
0
Cart

Conair MAN All-In-1 Trimmer NoSlip+5 Atchmnt Rechrgbl#GMT260

$27.49
Prices may vary from online to in store

How to get it


Conair MAN All-In-1 Trimmer NoSlip+5 Atchmnt Rechrgbl#GMT260

1 EA, 0.01 lbs. Item # 392591

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following: READ ALL INSTRUCTIONS BEFORE USING - FOR HOUSEHOLD USE ONLY. KEEP AWAY FROM WATER.

DANGER – Any appliance is electrically live, even when the switch is off. To reduce the risk of death or injury by electric shock: 1. Always unplug appliance from electrical outlet immediately after using (except when charging unit). 2. Do not place or store appliance where it could fall or be pulled into a tub or sink. 3. Do not use appliance while bathing or in the shower. 4. Do not place appliance in, or drop into water or other liquids. 5. If appliance has fallen into water, do not reach for it. Unplug immediately. 6. Unplug this appliance before cleaning.

Specifications
ColorYellow
Product typeHair trimmers
QuantitySingle pack

Before using the Class 2 Power Supply, read these instructions carefully. Use with adapter CA51 Rated input voltage: 100–240V AC, 50/60Hz 0.2A Rated output: 6.0V DC 70mA

OPERATION 1. For dry location use only. Do not expose to water. 2. When not in use, unplug unit completely. 3. Unit will become warm during operation.

CAUTION 1. Dry location use only. Do not expose to liquids, vapor, or rain. 2. Ensure jack is plugged into the trimmer unit before plugging the adapter into the outlet. 3. Do not operate any appliance that has a damaged output cord or housing. 4. Always unplug the unit before cleaning or when not in use. 5. This power unit is intended to be correctly oriented in a vertical or floor-mount position. 6. Be sure voltage is correct before plugging in. For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for power outlet. The adapter included automatically adjusts to the input voltage.

DO NOT USE WITH A VOLTAGE CONVERTER. TRIMMER OPERATING PRECAUTIONS

This trimmer has a built-in rechargeable battery. Do not throw into fire, apply heat, or charge, use or leave in a high-temperature environment.

CAUTION: Any changes or modifications not expressly approved by the Conair® Corporation, the manufacturer of this product and the party responsible for compliance, could void the user’s authority to operate the equipment.

TROUBLESHOOTING If your rechargeable trimmer does not seem to be taking a charge, take the following troubleshooting steps before returning it for repair: 1. Be sure the electrical outlet is working by plugging in another appliance to test the outlet. 2. Make sure the electrical plug is not connected to a switch that turns power off when lights are turned off. 3. Make sure the adapter is inserted into the trimmer properly, all the connections are secure and that the trimmer is in the OFF position.

OPERATING INSTRUCTIONS CHARGING 1. Before using your trimmer for the first time, charge it for 16 hours. Always charge the trimmer with the ON/OFF switch in the OFF position. 2. Always check to see if the charging light is on when you charge the trimmer. 3. Plug the adapter into any wall outlet (at the voltage listed on the label affixed to the adapter). Unplug adapter when not in use. 4. The adapter may become warm while charging. This is normal. 5. Battery life can be improved by periodically allowing the trimmer to run until the motor stops. Immediately shut the switch off and fully recharge. 6. Maximum battery capacity will only be reached after three complete charging and discharging cycles. 7. To maintain the optimum capacity of the rechargeable batteries, the trimmer should be recharged for 16 hours approximately every six months.

THREE-POSITION TAPER CONTROL The ConairMan® trimmer taper control switch is positioned at the back of the unit. You can hold the trimmer in your hand and adjust the switch as needed. The taper control eliminates the need in some situations for a comb attachment because it lets you gradually adjust the closeness of the cut. For closest cut and shortest hair, push switch all the way to level #3. This is the setting to use for the 2-day shave look. To increase the cutting length, slowly push control down to level #2 or #1 for longer cut. Note that too much clipped hair on the clipper can slow down its operation. To remove it without removing the blades, simply use a cleaning brush and gently sweep away the clipped hair from cutting surfaces. NOTE: The taper control only works with the facial hair trimmer.

USER MAINTENANCE INSTRUCTIONS

REMOVING THE BLADE SET 1. Make sure the trimmer is in the OFF position. 2. Place your thumb against the smaller cutter and push up to remove the blade set.

REPLACING THE BLADE SET 1. Make sure the trimmer is in the OFF position. 2. Align the back prong of the trimmer blade with the guide slot on the trimmer housing, place your thumb on top of the blade and snap into place.

OILING THE BLADES 1. Oil the trimmer once a month. 2. Turn the trimmer on. 3. Hold and point the blades downward. 4. Spread one drop of oil across the blades. 5. Turn the trimmer off and wipe away any excess oil. NOTE: 1. Do not over-oil the blades, as this can damage the motor. 2. Do not oil the motor bearing, as it is permanently lubricated. 3. KEEP OIL AWAY FROM CHILDREN.

BLADE CARE 1. Brush away any loose hair that collects in the

To reduce the risk of burns, electric shock, fire, or injury to persons: 1. Except when charging, never leave a plugged-in appliance unattended. 2. This appliance should not be used by, on, or near children or individuals with certain disabilities. 3. Use appliance only for its intended use as described in this manual. Use only attachments recommended by the manufacturer. Do not use an extension cord to operate the appliance. 4. Never operate the appliance if it has a damaged cord or plug, is not working properly, has been dropped or damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair. 5. Keep the appliance cord away from heated surfaces. 6. Do not pull, twist or wrap the cord around the appliance. 7. Never drop or insert any object into any opening on the appliance. 8. Do not place the appliance on any surface while it is operating. 9. Do not use the appliance with a damaged or broken comb or with teeth missing from the blades, as injury may result. Before each use, make certain the blades are aligned properly and oiled. 10. Do not use the appliance outdoors or where aerosol (spray) products are being used or where oxygen is being administered. 11. This appliance is not a toy. Keep away from children. 12. THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.